Zeus’ FluoroPEELZ™ offers medical device manufacturers a peelable heat shrink that simplifies catheter manufacturing. Now available in ratios up to 2:1, FluoroPEELZ™ helps accelerate production, increase yields, and improve safety.
Catheter construction is a delicate process with no room for error. The final step of removing the recovered heat shrink from over the outer shaft of the catheter is often the most critical and laborious. Now, with a simple linear tear, FluoroPEELZ™ brings simplicity to this final step.
FluoroPEELZ™ performs well in neurovascular and other small-diameter microcatheter applications. Used over low durometer jackets such as Pebax®, polyurethanes, and nylons, FluoroPEELZ™ eliminates nicks that have plagued operators and quality engineers for decades created by “skiving off” FEP heat shrink.
In order to reduce downstream processing and increase yields, FluoroPEELZ™ is being adopted into legacy catheter lines due to the cost savings this heat shrink provides. With dwell times and recovery temperatures consistent with traditional FEP heat shrink, FluoroPEELZ™ integrates seamlessly into existing catheter manufacturing processes – no new equipment, tooling, or capital investment needed.
The high optical clarity of FluoroPEELZ™ allows operators to visually inspect the construction during the reflow process. Once removed, FluoroPEELZ™ produces a smooth and void-free exterior finish.
FluoroPEELZ™ parts without colorants or additives have been tested for biocompatibility. USP Class VI, ANSI/AAMI/ISO 10993-4, and ANSI/AAMI/ ISO 10993-5 information is available upon request.
Balloon Tacking / Welding – Zeus FluoroPEELZ™ heat shrink provides an excellent means for welding balloons to dilation or drug delivery catheters. FluoroPEELZ™ is a superior alternative to polyolefin heat shrink, is easier to remove, and is not prone to tearing or damaging the balloon upon removal. If you prefer laser heating for your heat shrink recovery, FluoroPEELZ™ can be pigmented for use with CO2 laser recovery.
Catheter Construction – Used over nylon or Pebax® jacketing during catheter construction, Zeus FluoroPEELZ™ peelable heat shrink encapsulates the underlying jacketing while heat is applied to the outer FluoroPEELZ™ layer. The applied heat also melts the underlying jacketing material, allowing the jacket to reflow into the catheter braiding, thus bonding the catheter base liner, braiding, and jacketing together. Once the jacket material has cured, the recovered FluoroPEELZ™ top layer is removed, beginning with the FluoroPEELZ™ slit fixture.
Packaging / Balloon and Stent Protectors – As non-heat shrinkable extruded tubing, FluoroPEELZ™ is also available for use as packaging aids to protect catheter balloons, stents, or balloon-stent assemblies during the manufacturing process. Balloon and stent assemblies are held securely and protected within the FluoroPEELZ™ encapsulation until they are ready for use.
High Optical Clarity – Because FluoroPEELZ™ is transparent, production personnel can see the result of the reflow process as it happens. Detection of defects early in the production process allows corrective actions to be initiated sooner, minimizing lost production time and product.
Moderate Recovery Temperature – We recommend beginning the FluoroPEELZ™ recovery process at 420 °F (215 °C). This temperature is significantly lower than many other polymer heat shrinks, ensuring that a mandrel or liner made of PTFE will not reflow during the heat shrink process of catheter construction.
Affecting adults and children alike, structural heart disease encompasses non-coronary defects in heart function principally involving the heart’s valves or chambers. Interventional methodologies in this area have grown rapidly in recent years. Improved imaging ...
Peripheral Artery Disease (PAD) refers to diseases of the arteries that supply blood to the limbs and vital organs such as the kidneys and stomach. The most common of these diseases is atherosclerosis, in which plaque accumulates in peripheral arteries, limiting b...
Neurovascular disease affects the network of blood vessels in and surrounding the brain, leading to potentially fatal conditions such as strokes and aneurysms. With millions around the world affected by cerebral aneurysms each year, the need for improved neurovasc...
Disruptions in the heart’s electrical system can lead to serious consequences, including death. To treat these conditions, minimally invasive electrophysiology procedures have been developed to restore normal cardiac rhythm. At Zeus, we have been manufacturi...
Coronary artery disease (CAD) is caused by the accumulation of plaque on the inner walls of the arteries that supply blood to the heart. This deadly cardiovascular condition is treated with percutaneous coronary intervention (PCI, commonly known as coronary angiop...
Zeus delivers advanced polymer components designed to help medical device engineers access the most challenging and delicate areas of the body with precision and confidence. Leveraging decades of polymer science and extrusion expertise, our team collabora...