|
|
 |
|
PTFE/FEP
Dual-Shrink™ Tubing |
 |
| |
Home
>
Products
>
Heat Shrink
Tubing
> Dual-Shrink™
Tubing |
 |
|
| |
|
|
 |
|
|
|
|
 Heat shrink tubing offering a tight moisture-proof encapsulation |
| Outer tubing of PTFE shrinks for tight fit when heat is applied |
| Inner layer of FEP melts and flows to encapsulate parts |
|
|
|
|
|
|
| Sizes
and
Dimensions
(inches/mm) |
| Standard
Wall |
Lightweight
Wall |
|
As Supplied |
Recovered Dim. After Shrinking |
|
Recovered Dim. After Shrinking |
Recovered Dim. After Shrinking |
| Item No. |
I.D. Min |
I.D. Will Shrink To At Least |
Total Wall Thickness-Norm. |
Item No. |
I.D. Min |
I.D. Will Shrink To At Least |
Total Wall Thickness-Norm. |
| ZDS-S-036 |
0.036 |
0.000 |
0.023 |
ZDS-L-065 |
0.065 |
0.000 |
0.015 |
| ZDS-S-060 |
0.060 |
0.000 |
0.028 |
ZDS-L-115 |
0.115 |
0.045 |
0.015 |
| ZDS-S-130 |
0.130 |
0.000 |
0.032 |
ZDS-L-130 |
0.130 |
0.060 |
0.015 |
| ZDS-S-160 |
0.160 |
0.000 |
0.032 |
ZDS-L-180 |
0.180 |
0.065 |
0.015 |
| ZDS-S-190 |
0.190 |
0.062 |
0.035 |
ZDS-L-190 |
0.190 |
0.070 |
0.015 |
| ZDS-S-250 |
0.250 |
0.125 |
0.035 |
ZDS-L-240 |
0.240 |
0.150 |
0.020 |
| ZDS-S-350 |
0.350 |
0.190 |
0.035 |
ZDS-L-350 |
0.350 |
0.210 |
0.025 |
| ZDS-S-450 |
0.450 |
0.312 |
0.055 |
ZDS-L-480 |
0.480 |
0.315 |
0.032 |
| ZDS-S-700 |
0.700 |
0.440 |
0.055 |
ZDS-L-700 |
0.700 |
0.500 |
0.040 |
| ZDS-S-950 |
0.950 |
0.630 |
0.065 |
ZDS-L-1000 |
1.000 |
0.700 |
0.045 |
|
|
|
|
|
|
|
| Sizes
and
Dimensions
(inches/mm) |
| Standard
Wall |
Lightweight
Wall |
|
As Supplied |
Recovered Dim. After Shrinking |
|
Recovered Dim. After Shrinking |
Recovered Dim. After Shrinking |
| Item No. |
I.D. Min |
I.D. Will Shrink To At Least |
Total Wall Thickness-Norm. |
Item No. |
I.D. Min |
I.D. Will Shrink To At Least |
Total Wall Thickness-Norm. |
| ZDS-S-036 |
0.91 |
0.000 |
0.58 |
ZDS-L-065 |
1.65 |
0.000 |
0.38 |
| ZDS-S-060 |
1.52 |
0.000 |
0.71 |
ZDS-L-115 |
2.92 |
1.14 |
0.38 |
| ZDS-S-130 |
3.30 |
0.000 |
0.81 |
ZDS-L-130 |
3.30 |
1.52 |
0.38 |
| ZDS-S-160 |
4.06 |
0.000 |
0.81 |
ZDS-L-180 |
4.57 |
1.65 |
0.38 |
| ZDS-S-190 |
4.83 |
1.57 |
0.89 |
ZDS-L-190 |
4.83 |
1.78 |
0.38 |
| ZDS-S-250 |
6.35 |
3.18 |
0.89 |
ZDS-L-240 |
6.10 |
3.81 |
0.51 |
| ZDS-S-350 |
8.89 |
4.83 |
0.89 |
ZDS-L-350 |
8.89 |
5.33 |
0.64 |
| ZDS-S-450 |
11.43 |
7.92 |
1.40 |
ZDS-L-480 |
12.19 |
8.00 |
0.81 |
| ZDS-S-700 |
17.78 |
11.18 |
1.40 |
ZDS-L-700 |
17.78 |
12.70 |
1.02 |
| ZDS-S-950 |
24.13 |
16.00 |
1.65 |
ZDS-L-1000 |
25.40 |
17.78 |
1.14 |
|
|
|
|
|
|
|
Not familiar with our high quality Heat Shrink Tubing? Check out our Heat Shrink Notes for answers to many of your questions.
Standard
Packaging: 4 ft.
Lengths.
Zeus Dual-Shrink™ Tubing of Fluoropolymer PTFE/FEP is constructed with an exterior of heat shrink PTFE and an inner layer of FEP. It is easy to apply, and is designed to provide a tight, moisture-proof bond over wires, cables, connectors, splices, terminals, etc. The PTFE shrinks tightly over inserted parts when the covered section is heated, while the FEP melts and flows into a solid or near-solid encapsulation with a fit so tight that it can withstand the most severe stresses involving pull or vibration. Zeus Dual-Shrink™ Tubing provides all the outstanding electrical, chemical, and mechanical properties of PTFE, including a service temperature up to 450°
F (232° C). Custom specifications and tolerances quoted upon request.
 Contact
Us
For
more technical
information or
to request
samples of our
heat shrink
tubing,
click
here to contact
us
now.
|
|
|
|
"Offering custom Teflon® tubing and Teflon® heat shrinkable tubing as well as tubing and heat shrink made from fluoropolymer resins such as PTFE, FEP, PFA, ETFE, PEEK, and more."
Teflon® is a registered trademark of
DuPont
PEEK is a trademark of
Victrex PLC |
|
|
|
|
